Comparative Analysis of Alternative Hybrid Systems for Automotive Applications

Trivic, Igor (2012) Comparative Analysis of Alternative Hybrid Systems for Automotive Applications, [Dissertation thesis], Alma Mater Studiorum Università di Bologna. Dottorato di ricerca in Meccanica e scienze avanzate dell'ingegneria: progetto n. 2 "Ingegneria delle macchine e dei sistemi energetici", 24 Ciclo. DOI 10.6092/unibo/amsdottorato/4592.
Documenti full-text disponibili:
[img]
Anteprima
Documento PDF (English) - Richiede un lettore di PDF come Xpdf o Adobe Acrobat Reader
Download (46MB) | Anteprima

Abstract

The main objective of this work was to investigate the impact of different hybridization concepts and levels of hybridization on fuel economy of a standard road vehicle where both conventional and non-conventional hybrid architectures are treated exactly in the same way from the point of view of overall energy flow optimization. Hybrid component models were developed and presented in detail as well as the simulations results mainly for NEDC cycle. The analysis was performed on four different parallel hybrid powertrain concepts: Hybrid Electric Vehicle (HEV), High Speed Flywheel Hybrid Vehicle (HSF-HV), Hydraulic Hybrid Vehicle (HHV) and Pneumatic Hybrid Vehicle (PHV). In order to perform equitable analysis of different hybrid systems, comparison was performed also on the basis of the same usable system energy storage capacity (i.e. 625kJ for HEV, HSF and the HHV) but in the case of pneumatic hybrid systems maximal storage capacity was limited by the size of the systems in order to comply with the packaging requirements of the vehicle. The simulations were performed within the IAV Gmbh - VeLoDyn software simulator based on Matlab / Simulink software package. Advanced cycle independent control strategy (ECMS) was implemented into the hybrid supervisory control unit in order to solve power management problem for all hybrid powertrain solutions. In order to maintain State of Charge within desired boundaries during different cycles and to facilitate easy implementation and recalibration of the control strategy for very different hybrid systems, Charge Sustaining Algorithm was added into the ECMS framework. Also, a Variable Shift Pattern VSP-ECMS algorithm was proposed as an extension of ECMS capabilities so as to include gear selection into the determination of minimal (energy) cost function of the hybrid system. Further, cycle-based energetic analysis was performed in all the simulated cases, and the results have been reported in the corresponding chapters.

Abstract
Tipologia del documento
Tesi di dottorato
Autore
Trivic, Igor
Supervisore
Dottorato di ricerca
Scuola di dottorato
Ingegneria industriale
Ciclo
24
Coordinatore
Settore disciplinare
Settore concorsuale
Parole chiave
hybrid electric vehicle, high speed flywheel, pneumatic hybrid vehicle,hydraulic hybrid vehicle, ECMS
URN:NBN
DOI
10.6092/unibo/amsdottorato/4592
Data di discussione
18 Maggio 2012
URI

Altri metadati

Statistica sui download

Gestione del documento: Visualizza la tesi

^