Advanced low-consuming and low-cost Radio-over-Fiber system for dense/non line-of-sight/electromagnetic interference-exposed environments

Nasr Esfahani, Maryam (2026) Advanced low-consuming and low-cost Radio-over-Fiber system for dense/non line-of-sight/electromagnetic interference-exposed environments, [Dissertation thesis], Alma Mater Studiorum Università di Bologna. Dottorato di ricerca in Ingegneria elettronica, telecomunicazioni e tecnologie dell'informazione, 38 Ciclo.
Documenti full-text disponibili:
[thumbnail of PhDThesis_Maryamnasr.pdf] Documento PDF (English) - Richiede un lettore di PDF come Xpdf o Adobe Acrobat Reader
Disponibile con Licenza: Creative Commons: Attribuzione - Non Commerciale - Non Opere Derivate 4.0 (CC BY-NC-ND 4.0) .
Download (3MB)

Abstract

This thesis investigates the optical-interface challenges associated with the development of low-cost and low-consumption Radio-over-Fiber (RoF) systems for dense, non-line-of-sight, and electromagnetic-interference-exposed environments. Particular attention is devoted to the coupling between 850 nm Vertical-Cavity Surface-Emitting Lasers (VCSELs) and standard single-mode fibers (SSMFs), where operation at this wavelength introduces modal and alignment-related effects that can significantly influence link performance. A numerical framework based on the Electromagnetic Waves, Beam Envelopes interface of COMSOL Multiphysics was developed to investigate optical-field propagation and modal coupling at the VCSEL–SSMF interface. The effects of air-gap distance, transverse displacement, and angular misalignment were systematically analyzed. Optical Coupling Efficiency (OCE) and Extinction Ratio (ER) were jointly evaluated to account for both the coupled optical power and its modal distribution, enabling suitable operating regions and alignment tolerances to be identified. The numerical investigation was complemented by experimental characterization of the VCSEL–SSMF link through spatial optical-power mapping, frequency-response measurements, and extinction-ratio analysis. The experimental results confirmed the strong dependence of coupling performance on the alignment conditions and showed qualitative agreement with the trends predicted by the numerical model, supporting the validity of the adopted modeling approach. As a further development, 3D-printed microlenses were investigated as a beam-shaping approach for the VCSEL–fiber interface. The structures were numerically optimized, fabricated by two-photon polymerization, and structurally characterized by scanning electron microscopy, demonstrating the feasibility of the proposed micro-optical fabrication approach. Overall, this work establishes a combined numerical and experimental methodology for analyzing and optimizing VCSEL–SSMF coupling and provides practical design guidelines toward compact, energy-efficient, and alignment-aware RoF interfaces.

Abstract
Tipologia del documento
Tesi di dottorato
Autore
Nasr Esfahani, Maryam
Supervisore
Co-supervisore
Dottorato di ricerca
Ciclo
38
Coordinatore
Settore disciplinare
Settore concorsuale
Parole chiave
Radio-over-Fiber; VCSEL; SSMF; Optical coupling; Modal coupling; Extinction ratio; Alignment tolerance; COMSOL Multiphysics; Microlenses; Two-photon polymerization
Data di discussione
23 Ottobre 2026
URI

Altri metadati

Statistica sui download

Gestione del documento: Visualizza la tesi

^